Archive

Posts Tagged ‘vCenter Orchestrator’

vRealize Automation DEM worker cannot connect to Orchestrator

08/23/2016 Comments off

In vRA 6.2, using vRO 6.0, you may find that the data collection and other vRO workflows fail with the error “You must have at least one properly configured vCenter Orchestrator endpoint that is reachable”.  The IaaS/Monitoring/Log will show which DEM worker threw the error.  When you check the DEM worker logs for that instance, if you find the message “Could not create SSL/TLS secure channel. —> System.Net.WebException: The request was aborted: Could not create SSL/TLS secure channel“, you have probably been affected by VMKB 2123455 and MS KB 3061588.

Although both articles seem to suggest that removing the offending patch will solve the problem, I think figuring out exactly which patch is rather awkward.  The easier fix is to apply a quick registry hack to your DEM workers (and wherever the vRA Designer runs).

  1. Logon as an account with admin rights (suggest the account your IaaS services run under)
  2. locate or add the key

    HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\
    KeyExchangeAlgorithms\Diffie-Hellman

  3. Add/update the DWORD value ClientMinKeyBitLength and set the value to 512 decimal (200 hex)
  4. Restart the DEM worker service

 

Notes:
The Microsoft patch sets the default minimum group size to 1024.  It appears that the vRO 6.0.x appliances use something less than that.  This registry hack indicates that SCHANNEL should accept keys as small as 512 bits.  I suggest only applying this to the necessary and affected machines since it does lower the bar for the DHE security requirements.

Thanks to Zach Milleson for reminding me that this workaround may not resolve everyone’s issue, depending on which MS patches are installed.  If this workaround doesn’t work for you, you may have to locate and remove the offending patch.  YMMV.

Weak Diffie-Hellman key in vRealize Orchestrator

{Edited Oct 19 2015 to reflect updated information inVMKB 2131619}

Recent versions of Google Chrome and Mozilla Firefox have begun rejecting connections using SSLv3 ciphers. Chrome complains of a weak ephemeral Diffie-Hellman public key, calling it a “disastrous misconfiguration”.  Firefox’s message also complains of a weak ephemeral Diffie-Hellman key in Server Key Exchange, but doesn’t foreshadow impending doom.

Interestingly (I guess), Internet Explorer 11, still happily connects…

Firefox message on vRO configuration page

Firefox message on vRO configuration page

Chrome message on vRO configuration page

Chrome message on vRO configuration page

Let’s fix Orchestrator so that we can use FF and Chrome…

Procedure

Confirmed this works on the vCO Appliance v5.5.2.1 through v6.0.2.1 and on the vRealize Automation Appliance v6.2.x

  1. SSH into the appliance
  2. Enter this to navigate to the configuration for the configuration page

    cd /etc/vco/configuration

  3. Enter this to backup the server.xml file

    cp ./server.xml ./serverxml.backup

  4. Use vi, or whatever you’re familiar with, to edit server.xml and replace the line that reads (as one line)

    ciphers=“TLS_DHE_RSA_WITH_AES_256_CBC_SHA,
    TLS_DHE_DSS_WITH_AES_256_CBC_SHA,
    TLS_RSA_WITH_AES_256_CBC_SHA,
    TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
    TLS_DHE_DSS_WITH_AES_128_CBC_SHA,
    TLS_RSA_WITH_AES_128_CBC_SHA”

    with (again, as one line)

    ciphers=“TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
    TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,
    TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
    TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
    TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
    TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,
    TLS_RSA_WITH_3DES_EDE_CBC_SHA”

  5. save the file
  6. Repeat the steps above for /etc/vco/app-server/server.xml
  7. Restart the vco-server and vcp-configurator services

    service restart vco-server
    service restart vco-configurator

That’s it, you should be good to go. There’s probably other VMware applications that will need the same treatment though.

Not Diffie-Hellman

Dang, wrong Hellman

Fix – Unable to import vCAC/vRA certificates into Orchestrator

07/17/2015 Comments off

Problem:

While in the vRealize Orchestrator Client you find that the Library/Configuration/SSL Trust Manager/”Import a certificate from URL” workflow returns an error reading “InternalError: handshake alert: unrecognized_name” when provided. The URL the resolves to the Load-Balancer VIP for the vCAC/vRA appliances.

 

Background:

Signed SSL certificate installed on vCAC/vRA Appliance, SSL Passthrough on NSX/vCNX Load-Balancer, vCAC/vRA Settings/Hostname set to resolve to VIP, matching SSL cert.

 

Fix:

  1. SSH into the vCAC Appliance as root
  2. Backup /etc/apache2/vhosts.d/vcac.conf to vcac.conf.bak
  3. Use vi to edit /etc/apache2/vhosts.d/vcac.conf
  4. Scroll down to  <virtualHost _default_:443>
  5. Add these lines

    ServerName fqdn.of.appliance.node

    ServerAlias: load.balancer.name

  6. Scroll further to ensure these params aren’t listed elsewhere, remove or revise if so.
  7. save the file and exit vi
  8. restart the vCAC/vRA services

Automating NSX Security Groups with vCAC/vRA – Part 2

***UPDATE***  The download link is currently broken.   I seem to have lost the file, will fix the link as soon as I find or recreate it.  Sorry about that. 😦

In part 1 of this series, we created a list of security groups and displayed that list to users during the request.  In this post, we want to enhance that functionality by adding these features.

  • Creation of Security Groups and inclusion in Dropdown lists
  • Add a VM to a Security Group post-provisioning
  • Import existing Security Groups into vRA inventory
  • Add a Security Group to a Dropdown list

We’re going to do that by importing a vCO package with some new workflows and actions, then link up the workflows to Advanced Services and Resource Actions.  As before, we’ll require the NSX and vCAC/vRA plugins for Orchestrator.

Preparation

  • Complete the creation of the VCNS.SecurityGroup.Names.production property dictionary and valuelist attribute from Part 1.  We’re going to reuse those items. so make a note of the exact name of the property dictionary and the valuelist attribute.  In my case, I’ve named the Property Dictionary VCNS.SecurityGroup.Names.production and also named the valuelist attribute for it VCNS.SecurityGroup.Names.production
  • Make sure vRA Advanced Services Server Configuration is complete and test the connection to the Orchestrator server.  The default, built-in VCO is fine.
  • Login to vCO client as a vCO Admin. Set the mode to “Design” and navigate to the Inventory tab.  Make sure that you have a connection listed under “vCAC Infrastructure Administration” and a connection listed under “NSX”.

 

Confirm that you have the necessary connections on the inventory tab

Confirm that you have the necessary connections on the inventory tab

Get the Package

I’ve put together a handful of workflows and actions that use or expand the NSX plugin to provide information of functionallity back to vRA.  Where possible, I reused existing library workflows, but in some cases, I had to use the API to create a REST call and consume that in an action.

By downloading any code, package or file, you acknowledge that:

There is no explicit or implied warranty or support for the code.  Neither Brian Ragazzi, his employer nor anyone else is responsible for any problems, errors, omissions, unexpected behavior, breakage, trauma, outage, fatigue, lost time, lost work or incontinence that may occur as a result of using the code or package.

Download the zip file.  It contains the package and a couple of images that can be used for the advanced services

Import the Package

  1. Extract the zip file
  2. In the vCO Client, navigate to the packages tab.
  3. Click the “import package” button and select the extracted .package file
  4. On the Package Import Information step, click “Import

    Package Import Information

    Package Import Information

  5. On the Import package… step, check the “Select/Deselect all” box to check all of the items.  Please note the server path, these should not be duplicates of anything else you have in your vCO inventory (unless you’ve already imported this package previously).  Click “Import Selected elements”.

    Select all items

    Select all items

  6. Review the workflows and actions added to your inventory.

Configure Advanced Services – Create Security Group

This service enables the user to create a new NSX Security Group and automatically adds its name to the appropriate dropdown list of security groups.  It can be added once for each different list of security groups.  You’ll need to know the exact name of the Property Dictionary and valuelist attribute you created in Part 1.

NSX Management Services

NSX Management Services

NSX Security Groups in vRA Items

NSX Security Groups in vRA Items

  1. While logged into vRA as a service architect, navigate to the Advanced Services tab, click “Custom Resources
  2. We need to make vRA aware of NSX Security Groups.  Click the Add button.
  3. In the Orchestrator Type field, enter “NSX:SecurityGroup“; for the Name, I suggest “NSX Security Group“, click Next

    Add NSX Security Group as Custom Resource

    Add NSX Security Group as Custom Resource

  4. On the details form, we’re not going to make any changes, but if you wanted to hide certain properties, you could here.  Click “Add“.
  5. Click “Service Blueprints”, then the “Add” button.
  6. On the Workflow tab, select the AddNewSecurityGrouptoDropdown workflow, click next.

    Select "AddNewSecurityGrouptoDropdown" workflow

    Select “AddNewSecurityGrouptoDropdown” workflow

  7. On the Details tab, set the name to something like “Create new Production NSX Security Group“, because we’re going to create the security group and add its name to the “production”dropdown list.  Click Next.

    Set the Service Item Name

    Set the Service Item Name

  8. On the Blueprint  Form tab, under the “Step” Form page (default), mouseover the text field labelled “Name of Custom Property Dictionary in vCAC/vRA”.  Click the pencil “edit” icon when it appears.

    Edit the Form Fields

    Edit the Form Fields

  9. Click the Constraints tab of the “Edit Form Field” window.  On the Value field, select “Constant” and enter “VCNS.SecurityGroup.Names.Production” (or whatever suffix you used) for the Property Dictionary.  Set the Visible value to “No” so it doesn’t show up. Click Submit on the Edit Form Field window.

    Set the name of the Property Dictionary to be updated

    Set the name of the Property Dictionary to be updated

  10. Using the same method, set the Name of the Attribute appropriately and its visibility to no
  11. Edit the “Value to be appended to the ValueList attribute” field.  Set the label to “New Security Group Name“.  Do not set a value or make this one invisible, we need the user to enter a value, submit to save.
  12. Edit the vCACIaaSHost field – using the Constraints tab again– when setting the value, choose constant, then click Add by the green plus, to display a treeview, where you can choose your connection to the IaaS Server.  Visible: No, submit to save.

    Select connection to IaaS host

    Select connection to IaaS host

  13. Edit the “NSX endpoint” field in the same way, selecting the NSX connection.
  14. When done, all fields except “New Security Group Name” will have a value.  Click Next.
  15. On the Provisioned Resource tab, select “securityGroup [NSX Security Group]“.  Click Add to save the service blueprint.
  16. Repeat steps 5-15 for any other dropdown lists containing security groups; say “Non-Production” for instance
  17. Highlight the Service Blueprint and click “Publish” to make the blueprint available for entitlements
  18. Navigate to Administration, Services.
  19. Add a new Service named “NSX Management” (for example) – I included a nifty image in the zip file
  20. Under Catalog Items, click the “Create new Production NSX Security Group” item to edit it.
  21. The Catalog item should inherit the Security Group icon from vCO, set its Service to “NSX Management”,click update to save.
  22. Create or Edit an entitlement to include the new Service and/or catalog item.
  23. Try it out, confirm that the Security Group was created in NSX, is visible in vCAC items and it name was added to the Property Dictionary

Configure Advanced Services – Import Security Group

This service allows you to make existing security groups visible as items in the vCAC Items view.  Once this is done, we’ll add actions that allow you to add the security group to a dropdown list.

  1. Click “Service Blueprints”, then the “Add” button.
  2. Select the “GetNSXSecurityGroup” workflow, click Next
  3. On the details tab, set the name to “Import NSX Security Group“, click Next
  4. On the Blueprint form, set the “connection” to the NSX connection in vCO, then hide the field.  Security Group Name will be a dropdown list of existing NSX Security Groups for the user to choose from. Click Next
  5. On the Provisioned Resource tab, select “securityGroup [NSX Security Group]“.  Click Add to save the service blueprint.
  6. Just as before, publish the service blueprint, add it to a service and an entitlement.

 Configure Advanced Services – Add Security Group to Dropdown list

With this service, we’ll let the user add the name of an existing Security Group to a drop down list.  Unlike the first two, this is implemented as a Resource Action, meaning it’ll be executed against an existing item (a Security Group in this case)

  1. Under Resource Actions, click “Add”
  2. For the Workflow, select the “AddExistingSecurityGrouptoDropdown“, click Next
  3. On the “Input Resource” tab, keep NSX Security Group, click Next
  4. On the Details tab, set the Name to “Add Security Group to Production list” or similar, set the description, leave the Type options unchecked.  click Next

    Set Action Name and Description

    Set Action Name and Description

  5. On the Form tab, just like the first service blueprint, set the Property Dictionary and Attribute names as appropriate.  VCNS.SecurityGroup.Names.production in my example, set visible to no on both.
  6. Again, we’ll set the vCACIaaSHost to the connection to the Server and hide the field
  7. Click Add to save the action.
  8. Repeat steps 1-6 for each security group dropdown list (say “non-production” for instance)
  9. Publish the action and add it to an entitlement

    Add Action to Entitlement

    Add Action to Entitlement

  10. Test by navigating toNSX under Items, highlight a Security group and Select “Add Security Group to…” from the Actions menu.

    Yay! A Resource Action

    Yay! A Resource Action

 Configure Advanced Services – Add VM to a Security Group

This service lets you add a provisioned VM to additional Security Groups.  So, at provisioning-time, the VM is added to the Security Group selected by the user, but we may need to refine the security by adding that VM to additional Security Groups.

  1. Under Resource Actions, click “Add
  2. For the Workflow, select the “AddVMtoSecurityGroup“, click Next
  3. On the “Input Resource” tab, keep IaaS VC VirtualMachine, click Next
  4. On the Details tab, set the name to “Add VM to a Security Group“, click Next
  5. On the Form tab, set the connection Value to the NSX connection.
  6. Leave the NSX Security Group field visible, click Add to save the action
  7. Publish the action and add it to an entitlement
  8. Test by selecting a machine under Items and “Add VM to a Security Group” from the Actions menu

    VM Resource Action for Security Groups

    VM Resource Action for Security Groups

  9. You’ll be presented with the list of allNSX Security Groups to which you can add the selected VM

    Select Security Group

    Select Security Group

Conclusion

This part of the series should help streamline the management of VMs and their membership in Security Groups.  Obviously, items like removing a VM from a Security Group or even removing a Security Group are not included here.  The NSX plugin is missing quite a bit of functionality available in the API, so those additional functions require significantly more configuration.

Thanks to John Dias for his information and examples posted here.

 

Automating NSX Security Groups with vCAC/vRA – Part 1

In this series, I’ll document how to automate the creation and (some of) the management of NSX security groups within NSX.

First, what’s the use case?  Why is this interesting?  Let’s assume that you’ve decided to use large “flat” networks instead of many small networks.  One reason you may make that decision is because of the challenges with either having many blueprints (one per network!) or making changes to the workflows to reliably set the appropriate properties.

Background

In this solution, we’ll have to have vCAC 6.1 or vRealize Automation 6.2, NSX 6.x and vCenter/vRealize Orchestrator with the vCAC and NSX plugins installed and configured. We have two Logical Switches, one for Production and one for Non-Production.  In addition, there’s a corresponding network profile and the business groups have reservations.  Now, we have to ensure that there  are security boundaries within the flat networks.  We’ll accomplish this through Security Groups.

Caveats

We’ll create security groups and nod in the direction of security profiles, but will not be automating the creation of security profiles nor their assignment to the Security Group(s).  That can be done by the security admins through the NSX interface or maybe later we’ll add that capability too. 😉

 Procedure

  1. Create Security Groups.
    • Open vSphere Web Client and navigate to Networking and Security, then Service Composer.
    • Click the “New Security Group” icon
    • Enter a Name and Description for your new Security Group and click Next
    • If you want to create rules for dynamic membership or include/exclude existing VMs, you can do so in the subsequent steps.  Finish the wizard.
    • Repeat to create all of your security groups
    • Create Security Groups in NSX

      Create Security Groups in NSX

  2. Create Property Dictionaries invCAC/vRA.
    • Log into vCAC as an Infrastructure Admin and navigate to Infrastructure|Blueprints|Property Dictionary
    • Click “New Property Definition”, for the name enter “VCNS.SecurityGroup.Names.Production“.  You can replace “Production” with a name of your choosing, so you can have multiple lists.
    • Select “DropDownList” as the control type and check to make it required, click the green check to save.

      Create Property Dictionary

      Create Property Dictionary

    • Click the “Edit” link in the Property Attributes column
    • Click “New Property Attribute”, select “ValueList” as the attribute type
    • Set the name to something appropriate, such as the same name as the Property Definition or “ValueList” or “SecurityGroups”
    • In the Value field, enter the names of the security groups you want included.  Separate the group names by commas (no spaces).  If you have groups whose names include spaces or commas, put them in quotes.  Click the green check to save.
    • Repeat to create another property dictionary and attribute for the Non-Production list
  3. Update Blueprints.
    • Edit your “production” blueprints by adding the “VCNS.SecurityGroup.Names.Production” custom property. Set the value to your default security group or leave it blank to require a selection. Be sure to check the “Prompt User” box. Click the green check to save.

      Add Custom Property to Blueprint

      Add Custom Property to Blueprint

  4. Test
    • Submit a request for the affected blueprint and verify that the dropdown list of security groups looks like you expect it to. Remember, that unlike many other custom properties in vCAC (eg: Network Profiles), you CAN have multiple versions of this one and display different lists.

      Dropdown list of Security Groups

      Dropdown list of Security Groups

    • After a VMis provisioned, verify in the vSphere Web Client that ithas been assigned to the expected security group

      VM added to Security Group

      VM added to Security Group

Next

In the next parts of this series, I plan to address the problems of maintaining the dropdown list manually and having a single security group per machine.

Many thanks to my friend Grant Orchard for his article on selecting a security group in a blueprint . It was the inspiration for this series.

Configuring vCenter Orchestrator Appliance for High Availability

I don't get it either

Dunes? Dunes.

UPDATED 09/07/14

This is the third post in my series for building a fully distributed vCloud Automation Center deployment. In this post, we’ll configure vCenter Orchestrator (vCO) for High Availability using two nodes and an vCloud Networking and Security Edge Gateway as a Load Balancer.  I’ll use the vCenter Orchestrator Appliance v5.5.1.0.1617225.  I want to ensure that both vCO nodes return the same, organizationally-trusted SSL certificate, so we’ll configure that too.

Prerequisites

  • Database Server (ideally , it should be configured for high availability – I’ll be using a Microsoft SQL Server 2012 Failover Cluster)
  • Database for vCO
  • Credentials for database
  • Reserve IP addresses for two nodes and virtual IP
  • DNS records for both nodes and virtual IP (I’m using vcvco1 and vcvco2 for the appliance nodes and vcvco as the virtual)
  • Appropriate Identity Sources added to SSO
  • A vCO administrators security group with appropriate members
  • An Active Directory integrated Certificate Authority

Notes

In the steps below, text in red is not meant to be typed verbatim.  You’ll replace the value with something relevant to your environment.

Configure database settings (MSSQL)

To ensure that multiple Orchestrator nodes can use the database without clashing, you’ll need to enable a couple of optional settings.

Thiscan be done through script:ALTER DATABASE [vcvCO] SET ALLOW_SNAPSHOT_ISOLATION ON;
GO;
ALTER DATABASE [vcvCO] SET READ_COMMITTED_SNAPSHOT ON;
GO;

Or through theSSMS GUI:

Enable Miscellaneous options for the vCO database

Enable Miscellaneous options for the vCO database

Deploy and configure the First Orchestrator Appliance

  1. Using the vSphere or vSphere Web Client, deploy the appliance from OVF to an available HA cluster.  I named mine vcvco1.
  2. Adjust the resources if necessary and power on vcvco1.
  3. Browse to https://vcvco1:5480, logon as root
  4. Set the timezone, confirm the network settings and hostname.  I set the hostname to the vcvco, the cluster name. Log out of the VAMI.
  5. Browse to https://vcvco1:8283, logon as vmware
  6. Navigate to the Network section
  7. (Optional) on the Network tab, set the IP address to the actual address.  Leave the port numbers at default
  8. On the SSL Trust Manager tab, type the URL to your SSO server (eg:  https://vcsso.domain.local:7444) and click the Import button.  Verify that the certificate information is correct and click Import to add it to the trust.  Repeat this for your vCenter Server(s).
  9. In the Authentication Section, you can choose LDAP or SSO.  I’m going to configure it for SSO.  Enter your sso hostname (eg: vcsso.domain.local).  Click the Advanced Settings Link to see and verify that the Token service and Admin service URLs are fully populated with the correct port number (7444).  Enter  the user name and password for anSSO administrator (eg: administrator@vsphere.local) in the appropriate boxes.  Click the RegisterOrchestrator button. Wait for it….

    Registered with SSO, but not configured

  10. After the registration is confirmed, select the correct group in the vCO Admin – domain and group dropdown list. Then, click the Accept Orchestrator Configuration button.
  11. In the Database section; again I’m using SQL Server, but you’d select what’s appropriate for your environment.
  12. After the connection is made, click the link to Create the database tables, then Apply Changes.
  13. On the Licenses section, enter the host name of the vCenter Server and credentials, then click Apply Changes.
  14. Install any plugins you need (vCAC, ViPR, Powershell, etc) and restart the service to complete the plugin installation.

Create Package Signing Certificate

  1. On the Server Certificate section, click the “Create a certificate database and self-signed server certificate” link.  Enter vcvco.domain.local – that’s the load-balanced name, not the actual hostname – for the Common Name, set the organization, ou and country, then click Create.
  2. Still in the Server Certificate section, click “Export a certificate signing request”.  Save the vCO_SigningRequest.csr file to your system.
  3. Log into the Microsoft CA certificate authority Web interface. By default, it is http://servername/CertSrv/.
  4. Click the Request a certificate link.Click advanced certificate request.
  5. Click the Submit a certificate request by using a base-64-encoded CMC or PKCS #10 file, or submit a renewal request by using a base-64-encoded PKCS #7 file link.
  6. Open the certificate request (vCO_SigningRequest.csr) in notepad. Copy the content between —–BEGIN CERTIFICATE REQUEST—– and —–END CERTIFICATE REQUEST—–
  7. Paste the copied content into the “Base-64-encoded certificate request” textarea. Select Web Server as the Certificate Template.
  8. Click Submit to submit the request.
  9. Click Base 64 encoded on the Certificate issued screen. Click the Download Certificate Chain link.
  10. Save the package as C:\certs\certnew.p7b.
  11. Double-click thep7b to open it incertmgr.  Navigate to Certificates – Current User\C:\Certs\Certnew.p7b\Certificates.
    Certs in P7b

    Certs in P7b

  12. You’ll see two certificates here (unless you have intermediate certificates, then you’ll have more).
  13.  Right-click the one for the vCO server, choose All Tasks|Export.  Save the file as Base-64 encoded X.509 (.CER) as vco.crt
  14. Right-click the one for root CA server, choose All Tasks|Export.  Save the file as Base-64 encoded X.509 (.CER) to as root.cer .  Close certmgr.
  15. Before vCO will accept the CA-signed certificate, we have to import the root certificate.  Launch the Orchestrator Client.  You can use https://vcvco1.domain.local:8281/vco/client/client.jnlp
  16. Login to thevCO client as a member of thevCO Admins group
    Login to vCO Client

    Login to vCO Client

  17. In the client, launch Certificate Manager from Tools|Certificate Manager.
  18. Under Known Certificates, click the “Import Certificate” button.  Browse to and select root.cer that you saved earlier.  Verify that the certificate details are correct and client the “Import Certificate” button to finish. Close or minimize the vCO Client.
  19. Back on the Server Certificate section of the vCO configuration, click “Import a certificate signing request signed by a certificate authority”.  Select the vco.crt file you saved and click import.  If you get an error here, make sure you’ve imported the correct root (and any intermediate) cert into vCO.

Replace vCO Client certificate

Now, if you navigate to https://vcvco1.domain.local:8281/vco, you’ll see that the certificate is still untrusted.  Let’s fix that.  The certificate and key is stored with a specific alias and password, we’re going to replace them, but reuse the alias and password.

  1. SSH into vcvco1 as root
  2. Navigate to /etc/vco/app-server/security and make a copy of the jssecacerts keystore file

    cd /etc/vco/app-server/security
    cp ./jssecacerts ./jssecacerts.backup

  3. Use keytool to delete the item with the “dunes” alias. The keystore password is “dunesdunes”

    keytool -keystore ./jssecacerts -delete -alias dunes -storepass dunesdunes

    Delete "dunes" alias

    Delete “dunes” alias

  4. Use keytool to create a CSR. The certreq alias must be “dunes”.  Exporting the csr to the fie named vcvvcoreq.csr

    keytool -keystore ./jssecacerts -storepass dunesdunes -certreq -alias dunes -file vcvcoreq.csr

    Create CSR named vcvco.csr

    Create CSR named vcvco.csr

  5. Use filezilla or SFTP again to retrieve the csr
  6. Just like we did for the package signing certificate, submit a new request to your CA.
  7. This time, just download the certificate (not the certificate chain) in DER format instead of base64.  save the file as vcoDER.cer.
  8. Use filezilla or SFTP to copy vcoDER.cer to /etc/vco/app-server/security on vcvco1.  (you can actually place it anywhere, but this makes sense)
  9. Using keytool again, import the CA-signed cert into the keystore. The passwords are kept ‘dunesdunes”.

    keytool -keystore ./jssecacerts -storepass dunesdunes -importcert -alias dunes -keypass dunesdunes -file ./vcoDER.cer

    Import the cert

    Import the cert

  10. Restart the vCO services

    service vco-server restart

Prepare Second Orchestrator Appliance

  1.  Shutdown the first vCO appliance (vcvco1) to be safe
  2. Clone vcvco1 to a new VM named vcvco2, be sure to update the hostname and IP address in the vApp Properties. (Although it doesn’t affect the guest OS in this case)
  3. The cloned VM will retain the original IP address and hostname, so browse to https://vcvco1:5480, logon as root and set the correct IP address and hostname.
  4. Once vcvco2 is on the correct IP address, you can power on vcvco1
  5. Browse to https://vcvco2:8283, logon as vmware.
  6. On the Network area, select the correct IP address and apply changes.

Configure the cluster

Cluster mode, both nodes up

Cluster mode, both nodes up

  1. Browse to the vCO Configuration web interface, http://vcvco1:8283.  Logon as vmware.
  2. Under Server Availability, select Cluster mode
  3. Set the number of active nodes to 2, leave the heartbeat values at default unless you have a reason to change them. Click “Apply Changes”.  Note that there will be times when you’ll have to set the number of active nodes to 1.
  4. Under Startup Options, restart service.  This may not be necessary, but in my case, the nodes were not listed until after I restarted the vCO service.
  5. Repeat steps 1-4 on vcvco2

 

Preparing to load-balance
Note – this worked for me, YMMV

  1. Using vCNS Manager, locate the appropriate edge gateway, click Actions|Manage to open it for editing
  2. On the Configure Tab, edit the interface that will listen on the virtual IP
  3. Edit the Subnet and add the Virtual IP. It’s probably not the primary IP. Save and publish those changes.
    Add the virtual IP to the Edge Gateay

    Add the virtual IP to the Edge Gateay

  4. On the Load Balancer tab, on the Pools page, click “Enable”, then “Publish Changes”
  5. Click the green plus to add a load-balancing pool
  6. Enter a recognizable Name and Description, click “Next”.

    Load Balancer Pool

  7. On the Services step, check HTTPS, set Balancing Method to “ROUND_ROBIN” and the Port to 8281.Clck “Next”.

    Services (HTTPS:8281)

  8. On the Health Check step, set it as shown. Click “Next” when done.

    Health Check

  9. On the members step, click the green plus to add the IP address of yourvCO servers to the pool. I suggest keeping the weight for each at 1, while both nodes are active.  There are times when you’ll want to make one node active though (details below).  Keep the HTTPS port and Monitor Port at 8281 for each. Click “Next” once all you membersare added.

    vCO Members

  10. Review the Ready to complete step and click “Finish” if it all correct
  11. Click the Publish Changes Button before proceeding
  12. Click the “Virtual Servers” link, then the green plus to add a Virtual Server

    vCO Virtual Server

  13. Enter a meaningful name and description, provide the Virtual IP adddress that you added to the edge earlier, select the Pool created in the steps above and Enable HTTPS on port 8281. Set the Persistence Method to SSL_SESSION_ID and make the “Enabled” box is checked. Click “Add” then “Publish Changes”
  14. Test by navigating to https://vcvco.domain.local:8281/vco and verifying that the certificate matches.
  15. IMPORTANT UPDATE! – Repeat steps 7-14 above for TCP 8286 and 8287.  Without these undocumented ports, neither the vCO client nor the vCAC appliance will connect to the vCO cluster.

Additional steps
Put the two vCO nodes in a vApp, set them to start a few minutes apart to prevent both nodes from trying to initialize the database concurrently.

Use vApp to stagger the startup of the vCO nodes

Use vApp to stagger the startup of the vCO nodes

 

Notes, Caveats and Warnings

When writing information to vCO, such as designing and importing new workflows, VMware requires that only one vCO node be active.  I suggest that before you connect vCAC to vCO, you take the following steps:

  1. Logon to vcvco1 configuration as vmware , set the number of active nodes under Server Availability to 1.  Apply changes.
  2. Logon to vcvco2 configuration as vmware , set the number of active nodes under Server Availability to 1.  Apply changes.
  3. Watch the Service Availability area, wait for it to indicate that one node is in standby. If you’re impatient as I am, you can restart the service on vcvco2.  It should come up as standby.  Record which node is RUNNING.
  4. Logon to vCNS Manager, locate the appropriate Edge Gateway for the vcvco virtual server.
  5. Edit the Load Balancer pool, leave the RUNNING node with a weight of 1, set all other nodes’ weight to zero

Once the workflows have been created and edited and you want to resume distribution of vCO jobs among the nodes, just reverse these changes, setting the active nodes to 2 and the weights to 1 for both nodes.

Do not connect the vCO client to the virtual address.  In this case, only TCP8281 is forwarded and the vCO client needs additional ports forwarded to the nodes.  Other load-balancers/NAT devices may not have this issue.

This post may get some edits as I work through the rest on the vCAC distributed build.

I still have no idea why the certificate alias and password is “dunes”.  UPDATE – The company that was bought by VMware that originally developed the product that is now vCO was named “Dunes”.

References 

Work with vCO over SSL

VMKB2058674

vCO 5.5.1 release notes

Setting the Machine Name of a vCAC-provisioned VM using vCO

07/02/2014 Comments off

This is a follow-up to the series of posts named “Setting the Machine Name of a vCAC-provisioned VM to comply with a Corporate Standard“. In this case, I wanted to use vCenter Orchestrator instead of Powershell to generate the name from the component values.

For this sequence, we’ll still use part 1 to set up the Build Profile and Property Dictionary, but these steps will replace part 2 and some of part 3.

Review

Recall that for this example, the name should use the initials of the Business Group, “V” for Virtual, a single letter for the OS (“W” for Windows, “L” for Linux, “S” for Solaris, “O” for other), a three character “role” and a two digit sequence number for uniqueness.

Example Naming convention:
BG1VWAPP14
BG1 = Business Group initials
V = Virtual
W = Windows
APP = APPlication server
14 = Sequence number

vCenter Orchestrator Workflow

  1. Create a Folder for your workflows outside of the “Library” and other folders
  2. Inside this folder, create a new workflow.  I named mine “vCAC.MachineName“.  The workflow will be opened for editing.
  3. Navigate to the “In” tab, add this attribute
    Name Type Value Description
    CharacterToReplace String What Character in the original name will be replaced
  4. Navigate to the “Inputs” tab, add these Parameters:
    Name Type Description
    OriginalName string ex: SUP-02
    OperatingSystem string ex: Windows 2008 R2
    Role string ex: SQL
  5. Navigate to the “Outputs” tab, add this Parameter:
    Name Type Description
    newMachineName string Name created from component values
  6. From the “Generic” pane, drag the “scriptable task” item to the blue arrow.

    Default schema

    Default schema

  7. Mouseover the scriptable task item in the schema and click the Pencil icon to edit the item

    Edit the Scriptable Task

    Edit the Scriptable Task

  8. On the “IN” tab of the scripting task properties, click the “Bind to workflow parameter/attribute” button to add these parameters:

    Scriptable Tasks IN Parameters

    Scriptable Tasks IN Parameters

  9. On the “OUT” tab of the scripting task properties, click the “Bind to workflow parameter/attribute” button to add these parameters:

    Scriptable Tasks OUT Parameter

    Scriptable Tasks OUT Parameter

  10. Open the Schema tab of the Workflow.
  11. Paste the following:


    var OS;
    OS="O" //"O" not zero, for "Other"
    OperatingSystem = OperatingSystem.toUpperCase();
    if (OperatingSystem.search("WIND")> -1) {OS="W"};
    if (OperatingSystem.search("RHEL")> -1) {OS="L"};
    if (OperatingSystem.search("SLES")> -1) {OS="L"};
    if (OperatingSystem.search("SOLA")> -1) {OS="S"};
    Role='V'+OS+Role.substring(0,3); //"V" for Virtual
    newMachineName = OriginalName.replace(CharacterToReplace,Role).toUpperCase();

    I’m not much of a javascript coder, so this is probably not the best way to write this. But, it worked for me. Close the scriptable task editing window.

  12. Back on the Schema tab of the workflow, let’s test our code. Click the “Run” button, enter some values in the fields and click submit.

    Test Run workflow

    Test Run workflow

  13. When the workflow finishes, check the Variables tab on the right to confirm that the newMachineName parameter has the expected value.

    Resulting newMachineName

    Resulting newMachineName

  14. If satisfied, click “Save and close” to save your new workflow

vCAC Workflow

There are only two changes to be made from the steps outlined here.  The first is in Step 3, instead of using a variable named “PowerShellOutVar“, we’re just going to name it “OutVar” for obvious reasons.  The second change is a replacement of step 7, do this instead:

  • From the DynamicOps.VcoModel.Activities toolbox, drag “InvokeVcoWorkflow” to the designer.

    InvokeVcoWorkflow

    InvokeVcoWorkflow

  • Click the ellipsis button to  display a list of the workflows in vCO, select the workflow we made earlier (vCAC.MachineName in this case).  Note that you can filter on the Folder to make it easier to find.
  • Set the parameters
    Direction Name expression/value
    Input OriginalName vmName
    Input OperatingSystem vmwareOS
    Input Role machineRole
    Output newMachineName OutVar

    Variables & Parameters

    Variables & Parameters

  • Continue with the remainder of the steps, remembering that when you link it up in step 12, you’ve replaced “InvokePowerShell” with “InvokeVcoWorkflow

Good luck!